Quote:
Originally Posted by Surcouf
So of course the water plate that I had to flip is now leaking with the damaged gasket, extra Permatex was not sufficient. But that will not prevent me to sail for now. I am ordering new gaskets (plate + thermostat) to Ken right now.
|
One bit of advice is to mop up the leaking water when you can while you wait to re-do the side plate.
You won't want to lose the ground gained by having that water cause rusting/corrosion and possibly lead to other issues resulting from that.
Quote:
|
But the to-do list on the electrical of that boat is now much longer...
|
Keep us in the loop on that upgrade.
Lot's of good guy's advice available (Neil, Joe, etc)