View Single Post
  #1   IP: 172.58.45.18
Old 03-30-2019, 01:16 PM
Brandon_b Brandon_b is offline
New Member
 
Join Date: Mar 2019
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Trying to bench test.no spark wiring wrong?

I got a early model atomic 4. Used been sitting for 4 year and fot it home i wired it up half fast to try to see if i get spark and to check compression.
I ran a ground from battery to ground bolt on starter
A positive to starter solenoid from battery as seen on diagram then I just decided to run a jumper wire from Battery positive to coil positive I have brand new coil points condenser I took the distributor cap off to watch the points see if I get Spark I get nothing am I missing something i jumped the motor wit jumper cable to starter solenoid and grounded to the block that was my way to get it to crank
Reply With Quote