View Single Post
  #15   IP: 32.211.28.40
Old 11-09-2019, 09:15 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Quote:
Originally Posted by sagem57 View Post
just a thought. drill a small pilot hole down thru the center of the bolt, then chase it down with a large countersink to machine away the head of the bolt. and remove the chock. as for the rest of the bolt I don't know what to tell you.
I like this! Just get rid of the head of the bolt & free the chock. You did say you were going to move it! Don't remove the rest of the bolt - just leave it there! Drill new holes in the new location, but make them thru holes with nuts on the inside. Don't tap into the aluminum.
Reply With Quote