View Single Post
  #29   IP: 71.168.64.101
Old 06-16-2012, 08:46 AM
ArtJ ArtJ is offline
 
Join Date: Sep 2009
Posts: 2,177
Thanks: 221
Thanked 65 Times in 50 Posts
Be sure and insulate it really well. Two or three wraps of tape. I also
put a piece of stove pipe at the 90 degree elbow and even cut back
some of the wood as it was getting blackened ! That was 10 years
ago, still gets hot, but I keep engine cover off during long runs of several hours and always run the blower with engine.
The original insulation was asbestos plaster.


Best Regards

Art
Reply With Quote