View Single Post
  #3   IP: 69.177.114.72
Old 06-16-2011, 09:01 AM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
I voted 'absolutely' as I have done this successfully. Being able to use a drill press for the drilling is a big plus, otherwise you need some sort of fixture to hold the drill (and tap) square. Doing it freehand is asking for trouble as the hole and threads are likely to be off alignment. Often the mating part can be used as a fixture with suitable bushings around the drill and tap.
Reply With Quote