View Single Post
  #5   IP: 32.211.28.40
Old 08-20-2019, 11:21 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Two choices on exhaust material - black iron (low cost but on borrowed time after 5 years) or stainless. Don't use galvanized.
Without a waterlift, getting height to the water injection point is the key to satisfactory operation. If you've got room to install the Moyer mixing can, that's ideal (in my book).
Reply With Quote