View Single Post
  #6   IP: 67.68.89.124
Old 05-03-2013, 03:15 PM
Fred2011 Fred2011 is offline
Member
 
Join Date: Apr 2013
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
The Scuppers I am looking for are the stainless steel variety and they are 1-1/8 inside across and 2" outside across. They are also very flat and sit flush with the cockpit floor. Also they are the same on the side rails. Many thanks for looking at this matter. Fred
Reply With Quote