Quote:
Originally Posted by keithems
in the mmi manual rebuilding / reassembly section, don says that the output coupling has to be seated against a special flat washer which is not shown in the universal parts diagram.
i am reassembling and i have not found such a washer. is don referreing to the flat lock washer with the ears you bend to hold the nut on at the end?
thanks
|
I encountered that washer just yesterday when I get home from work I'll take a picture and posted it is flat on 1 side and concave on the other.
__________________
With Powerboats, it's about the destination. With Sailboats, you are already there.
Jeff
S/V Karinya
1973 Grampian 30', Full Keel, A4 aux.
Last edited by 13jeff13; 06-10-2012 at 12:23 PM.
Reason: typo
|