Quote:
Originally Posted by AFisch
..I ended up not replacing the needle and seat because I didn't have a flat head screwdriver big enough to fit the seat properly without potential of damaging...good excuse to get more tools.
|
Here's my way.
1st get the proper tool.
Put the carb half over a piece of 2X4 or 4X4. Hold with one hand, get square over (stand up) and twist the tool with the other hand. This will avoid any sideways torque. You will probably be amazed how easy the seat comes loose.
Stick with it. You are getting closer and learning a lot.
ex TRUE GRIT