Moyer Marine Atomic 4 Community - Home of the Afourians - Female threads on inline exhaust water injector

Moyer Marine Atomic 4 Community - Home of the Afourians (https://www.moyermarineforum.com/forums/index.php)

- The Wish List (https://www.moyermarineforum.com/forums/forumdisplay.php?f=54)

- - Female threads on inline exhaust water injector (https://www.moyermarineforum.com/forums/showthread.php?t=5166)

Baltimore Sailor

04-16-2011 04:58 PM

Female threads on inline exhaust water injector

Right now the treads on the inline water injector are 1 1/4" male, which require a coupling to attach at the end of a pipe section. If the fitting were made with female threads, the need for the extra fitting would go away.

hanleyclifford

04-16-2011 05:53 PM

Why not go back up to the 45 and install the injector fitting there?

All times are GMT -4. The time now is 10:33 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved