late model starter / solenoid
When removing the starter to change the solenoid , are there any gaskets
on either of these parts . I have purchase the solenoid , its on the boat to be installed . I just don't remember if there are gaskets involved ? |
good~~,there is no gasket for the starter however there may be spacers in some cases. The starter needs all the grounding it can for full power.
Dave Neptune :cool: |
There is a rubber gasket for the solenoid however.
https://moyermarine.com/product/delc...ovel_07-1_326/ |
solenoid
When I ordered the Solenoid , I failed to order the gasket .. I didn't know
one was needed . I Will order on Monday , thanks |
I am pretty sure the part Neil pointed to is what makes the starter/solenoid ignition proof for an inboard gasoline engine...a USCG requirement.
|
All times are GMT -4. The time now is 05:53 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Universal® is a registered trademark of Westerbeke Corporation
Copyright © 2004-2024 Moyer Marine Inc.
All Rights Reserved