Hello All,
While running my engine I notice the temp. gauge is pegged at maximum.
Is there an easy way to test gauge with a multi meter or other method.
Could it be a ground issue?
I have a second gauge and sender I could remove from my parts engine,
but would like to check original before I do a switch.
one note, I have only run engine from marina launch area to the mooring field, a 5 minute motor and 20 minutes charging batteries.
Thanks,
Joe
While running my engine I notice the temp. gauge is pegged at maximum.
Is there an easy way to test gauge with a multi meter or other method.
Could it be a ground issue?
I have a second gauge and sender I could remove from my parts engine,
but would like to check original before I do a switch.
one note, I have only run engine from marina launch area to the mooring field, a 5 minute motor and 20 minutes charging batteries.
Thanks,
Joe
Comment