2 atomic 4s in Annapolis & rebuilt carb x2
I’ve got two engines. The one I got for parts and ran before I stripped off the distributor and manifold. The cracked manifold can probably be JB welded. The electronic distributor might be shot. I don’t know. I prefer the points.
The one that’s running has low compression in cylinder 3 & 4. The one carb is never used professionally rebuilt with all new parts including the float. The other carb I rebuilt myself and just needs to be dialed in. But is still good to go. The 3rd carb needs a rebuild. Tons of spares new and used. Points, plugs, wires, fuel filters, belts etc... Call me and let me know what you want. 443-797-3698 -Spencer |
Spencer, Welcome to the forum. I am not too far away. I am always seriously looking for a block/motor to rebuild.
Some pictures would help. let's see what you got. :cool: Edit - You should have an email. |
All times are GMT -4. The time now is 03:14 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Universal® is a registered trademark of Westerbeke Corporation
Copyright © 2004-2024 Moyer Marine Inc.
All Rights Reserved